You are required to change the injector plug on the wiring harness in your car unless otherwise stated from the connector drop down menu. This can be done by soldering in the free pigtail kit or crimping the free plug and pin kit to replace the plugs currently on your harness, or you can choose to purchase the optional plug and play adapters or harness.
The plug and play adapters or harness will convert from the type of plugs on these injectors to the plugs on your harness without any cutting or soldering required. If plug and play adapters or wiring harness are purchased the pigtail connectors will not be included (if applicable).
I recommend novice installers have a qualified and experienced professional at hand to ensure a successful installation.
All injectors are tested @ 3bar
All injectors have serial numbers engraved to document flow
2200cc - Incompatible Fuels: Fuels containing MTBE, such as Nitro Methane, Nitro Propane, VP import, VP Q16
Excellent spray pattern and atomisation for idle and tuning
Great linear response and short pulse width repeatability
Battery offset data also known as lag, deadtime and latency are available with the injectors
There is24 month warranty against defects in original manufacture
The Bosch EV14 injectors are designed to be used with gasoline based fuels, however the fuel system must be regularly flushed out and stored with gasoline with the use of alcohol to minimise flow imbalance that is associated with it.
FREE UK and European delivery via ROYAL MAIL
Expedited delivery also available via UPS from £35